Récepteur radio RF Rx EN868-2W-RS232

Features/Options

  • EnOcean-standard
  • 2-channel: potential-free relay outputs
  • 2 change-over contacts,
    max. 10 A
  • RS 232 interface
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
  • SMA plug-in connector for external antenna

Product image

 

Caractéristiques techniques

Standards EN 60947-5-1; EN 61000-6-2;
EN 61000-6-3; EN 60068-2-6;
EN 60068-2-27; EN 301 489-1;
EN 301 489-3;
EN 300 220-2 RS 232:
ANSI/EIA/TIA-232-F-1997
Number of channels 2
Mounting DIN rail mounting
Connection terminals with CAGE CLAMP
WAGO Series 236:
0.08 ... 2.5 mm²
AWG 28–14
(incl. conductror ferrules)
Degree of protection IP 20 per IEC/EN 60529
Inputs 2 radio channels, max. 10 transmitters
per channel
Outputs 2 change-over contacts (relay)
Rated operating
current Ie		 max. 0,25A AC, 0,1A DC
Rated operating
voltage Ue		 24 V AC/DC -15% … +10%
Ie/Ue of output contacts 6A / 250 VAC; 2A / 24 VDC
Utilisation category AC-15; DC-13
Ui 250 VAC
Uimp 2,5 kV
Frequency 868.3 MHz
Display green LED: operating voltage,
yellow LED: switching conditions +
yellow LED: Baudrate alignment
Switching frequency approx. 9000 telegrams at repetitions/h
Degree of pollution 2 per DIN VDE 0110
Ambient temperature 0 °C … +55 °C
Storage and transport temperature -25 °C … +85 °C
Vibration resistance NO 20g, NC 5g
Shock resistance max. 100g
Interface
Baudrate 9600 Bd to 57600 Bd
Databits 8
Stopbit 1
Parity None
Flow control None
External antenna always required for optimum sensing range
Note Inductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry.
Approvals